Flagpoles

Secure flagpoles for every type of installation

Etendard offers a wide range of flagpoles for commercial or residential use. These masts can be mounted on the floor, wall, roof, or held in place by a car tire.

Aluminum Commercial Flagpole

Brushed satin finish
The brushed satin finish is achieved through abrasive brushing yielding a smooth, uniform appearance.

Internal Halyard
This system consists of a combination of stainless steel cable and durable plastic chain routed through the interior of the shaft and secured using a fastening hook. Access to the chain and hook is protected by a locked door. A revolving cap is standard for this rigging. Internal halyard systems are used where vandalism is a concern.

Fixed Anchor Shoebase

  • Anchors made from galvanized steel.
  • All flagpoles come equipped with a base cover to cover and protect the anchors.
  • Internal halyard; brushed satin aluminum finish.
  • Formats: 20-25-30-35-40-45-50-60-70 and 80’ (6 to 25 m)
  • Anchors are provided with the pole. All you need to do is pour a concrete form and sink the anchors.

Fibreglass commercial flagpole

  • Its cone shape, white finish and golden ball make for a quality appearance.
  • Internal halyard.
  • Formats: 20-25-30-35-40 and 45’ (6 to 14 m)
  • This pole is lightweight and does not require a crane for installation.
  • Anchors are included.

Residential flagpole: quick installation requiring only a few tools

  • This pole comes in four sections for a length of 20’’ (610 cm).
  • The diameter of the pole is 2” ’’(5 cm).  A decorative ball, 2 hooks and rope are included.

Wall-mounted flagpole

  • Comes with a decorative aluminum ball 3” (7.5 cm) in diameter.
  • 5-position adjustable bracket:
  • Galvanized steel brackets with 6 x 8” (15 x 20 cm) anchor plate.
  • This bracket must be securely attached to the wall and used with a 1.5” x 8’ (4 cm x 245 cm) aluminum pole equipped with a windshutter (wall anchors not included).

Roof mounted flagpoles

  • Galvanized steel roof bracket with 24” (60 cm) arms.
  • Used with sandbags or U-shaped weight to provide the weight required for installation.
  • The aluminum pole, 1.5” in diameter x 10’ (4 x 300 cm), is generally used to hold a flag.

 

Car-mounted flagpole

  • Galvanized steel roof bracket with 24” (60 cm) arms.
  • Used with sandbags or U-shaped weight to provide the weight required for installation.
  • The aluminum pole, 1.5” in diameter x 10’ (4 x 300 cm), is generally used to hold a flag.
All rights reserved © 2017 L'étendard - Flags and banners